Assembly- & disassembly for KillHill/ClimbHill/Mig/Mag/Princess/Prince/Cannonball hubs

tune Updated by tune

Assembly- & disassembly instructions hubs

Attention: As of January 2024, our bearings have been improved – they now offer a bit more reliability, better materials, and better seals.

There are two variants: Standard (or ABEC-5) and Ceramic (XD-15). The standard bearings are wear parts and will need to be replaced eventually, depending on how and where you ride. The ceramic bearings offer a lifetime warranty and are worry-free.

For the standard bearings (or ABEC-5), there are two different seals: a non-contact one in black and a contact one in gray. Please always mount the gray seal outward. This ensures good rolling and also provides good protection.

You can access the assembly- & disassembly instructions for our hubs under the link below:

Assembly- & Disassembly instructions hubs

How to adjust your front hub

How to adjust your front hub like a pro

How to adjust your rear hub

How to adjust your rear hub like a pro

How to change the bearings on your front hub

How to change the bearings on your rear hub

How to change and adjust your freewheel body

How to change the pawls and springs on your freewheel body

How to change your titanium gear ring on your Tune rear hub

How to mount and adjust your Cannonball 2.0

How to change the configuration of your SuperKillHill front hub

How to change your front hub standard

How to lace a Princess hub

How did we do?

Exploded views hubs & freewheels for KillHill/ClimbHill/Mig/Mag/Princess/Prince/Cannonball

Contact